LAUSR

This paper presents the harmonic suppression and stability enhancement of a grid voltage sensorless current controller for a grid-connected inverter under weak grid conditions. Given that inductive-capacitive-inductive (LCL) filters represented as higher-order dynamics cause resonance problems, a considerate resonance frequency damping process is required. In particular, the resonance phenomenon of the LCL filter crucially influences the current quality when the grid-connected inverter is connected to a weak grid with uncertain grid impedance and distorted harmonics. Additionally, there is a possibility that the control system will become unstable due to changes in system parameters, even after considerate resonance frequency damping. In order to solve these problems, this paper presents an active damping (AD) method by using integral variables in an integral state feedback current controller for a grid voltage sensorless inverter system, which significantly improves the current harmonics and stability of the grid-connected inverter under weak grid condition. The presented closed-loop current control scheme only requires the measurement of the injected grid currents and DC-link voltage. Compared to the traditional state feedback control methods, the reliability and robustness of the proposed control scheme are much improved even with reduced system cost. The stability and current control performance of the closed-loop system are investigated in the presence of uncertainty in the grid impedance and filter capacitor parameter under distorted grids. In order to support the theoretical analyses, the comprehensive simulation results are presented in terms of the grid current quality and control stability in an environment with both uncertain grid impedance and a distorted grid. Experimental results are also presented by using a 32-bit digital signal processor (DSP) TMS320F28335 controller for a 2 kVA grid-connected inverter to validate the feasibility of the proposed scheme practically.