LAUSR

Intensity modulation and direct detection (IM/DD) together with pulse amplitude modulation (PAM) is a cost-efficient solution for intra-datacenter links. However, sophisticated digital signal processing (DSP) is inevitable to reach the demanded high data rates for these short-reach applications. In this article, we compare different DSP schemes that enable rates of 200 Gb/s/λ and beyond. Those schemes include Tomlinson–Harashima precoding, partial response signaling, Viterbi equalization and post-filtering together with Volterra nonlinear equalization. Extensive experimental measurements are shown in which the DSP approaches are compared at gross rates between 180 Gb/s and 300 Gb/s. The experiments are done in C-band for fiber links of up to 2 km length. As modulation formats, PAM4, PAM6, and PAM8 are considered. Net bit rates well over 200 Gb/s are shown for all formats at a range of 1 km single mode fiber using a transmission system consisting of currently available commercial components. The optimum DSP configuration as well as the best modulation format varies along the investigated data rates. The best solution is shown to change from partial response PAM4 for lower rates to PAM6 and PAM8 at high bit rates.