LAUSR

This paper studies the current limiting behavior based on an air-core high-temperature superconducting transformer (HTST) and a group of inductor–capacitor series resonant limiters. The air-core HTST is composed of four same double-pancake type high-temperature superconducting coils made up of Bi-2333/Ag tape, and both of primary and secondary windings include two series superconducting coils. It plays the roles of inductive fault current limiting and transformation impedance; in addition, the magnetic flux saturation can also be avoided. Meanwhile, the inductor and capacitor series with the secondary winding of the air-core HTST in series resonance state are the conventional devices. The influence of them on the circuit can almost be ignored, because they are in series resonant state in normal operation. While the fault current appeared in the primary circuit, it will be limited by the impedance of the air-core HTST and the inductor without quench (the inductor and capacitor would quit the series resonant state). According to the preliminary experiment carried out in our laboratory, this superconducting current limiting module can operate as expected, and its behavior is satisfactory.