LAUSR

The conversion from a Residue Number System (RNS) to a weighted representation is a costly inter-modulo operation that introduces delay and area overhead to RNS processors, while also increasing power consumption. This paper proposes a new approach to decompose the reverse conversion into operations that can be processed by the arithmetic units already present in the RNS independent channels. This leads to a more effective reuse of the processor circuitry while enhancing parallelism. Experimental results show that, when the proposed techniques are applied to architectures based on ripple-carry adders for the traditional 3-moduli set, the delay is improved in average by 16 percent, the circuit area by 36 percent and the power consumption by 47 percent. When carry-lookahead adder topologies are considered, these improvements are in average of 45 percent for the circuit area and 58 percent for the power consumption while the delay is only slightly reduced. The proposed techniques are applied to a use case in digital filtering, showing an increase in throughput/area of up to 1.25 times, and average reductions in energy consumption of 15.6 percent. This work is a step forward to the usage of RNS in practice, since reverse conversion underpins other hard inter-modulo operations, like comparison, scaling and division.