LAUSR

This paper reports on design of novel balanced bandpass filters (BPFs) using quarter-wavelength stub resonators. For the design purposes, differential-mode (DM) and common-mode (CM) half-equivalent circuits are established and analyzed carefully. In this paper, CM noise is introduced into the filter and dissipated on the resistors on periodic bands. First, a balanced BPF topology based on conventional quarter-wavelength stub filter is presented. By symmetrically introducing series matching resistors to the ground at the center of the stub, CM noise can be rejected either reflectively or reflectionlessly without affecting DM performance. The harmonic property of stubs provides periodic CM suppressing response as long as the resistor has no serious parasitic reactance. By doing so, CM noise can be suppressed under a certain level at all frequencies. However, the harmonic property also leads to some spurious passbands. This defect can be avoided by an improved filter topology with two additional capacitors. To reserve the CM feature, the corresponding DM and CM half equivalent circuits are developed as well. The proposed layouts are fabricated on a two-layer printed circuit board. The resulting experimental circuits exhibit the expected electrical performance, forming balanced BPFs with CM noise suppression level over 12 dB at all frequencies, and show an agreement with the simulated results.