LAUSR

Vienna rectifier, which is a nongenerative-boost-type rectifier, is widely used in industrial applications, such as wind turbine systems. However, the Vienna rectifier will face the challenge of reducing common-mode voltage (CMV), maintaining the sinusoidal input currents, and balancing neutral-point (NP) voltage in practice. As these issues are mutually coupled, the conventional space vector modulation (SVM) and various types of enhanced schemes cannot solve these problems properly, especially under nonunity power factor operation. To overcome these limitations, a two-layer pulsewidth modulation scheme through vector selection is developed. In the first layer of the proposed strategy, the NP voltage oscillations are mitigated by adjusting the switching sequence and dwell time of large, medium, small, and zero vectors with reduced CMV as the same in large, medium, and zero vector modulation. In the second layer of the proposed strategy, the switching states are reselected, and the dwell times are real time adjusted to eliminate the distortions in input currents. Through the aforementioned two-layer control method, CMV reduction, input current distortion elimination, and NP voltage balancing in Vienna rectifier can be realized simultaneously. The correctness and effectiveness of the proposed SVM method are verified by the experiment.