LAUSR

In this article, a new high step-up transformerless dc–dc converter based on a voltage multiplier and a coupled inductor topology is presented. The proposed converter has two stages. In the first stage, a modified boost converter is designed by the coupled inductor, and in the second stage, a new voltage multiplier by using a coupled inductor is illustrated. In this converter, high voltage gain can be achieved by adjusting the turn ratio of two coupled inductors and the duty cycle, which result in three degrees of design freedom. Using a single power switch with low on-resistance in the converter structure leads to simple control and low conduction loss. In addition, total voltage stresses of active elements are decreased, which increases efficiency. Steady-state performance and theoretical achievements are confirmed by experimental test results on a test setup with one 200-W dc–dc prototype.