LAUSR

Power-electronic-converter-induced motor bearing currents are a widespread problem in the field of electrical drives. Parasitic capacitances between the electrical machine's parts provide a path for leakage currents, which finally harm metallic ball bearings. Remembering that end-windings have a significant contribution in building up stray capacitances, a countermeasure affecting both the lamination stack and end-winding areas is needed. This article focuses on a countermeasure against the noncirculating bearing currents in the cluster of solutions at the motor side. The electrostatic shielding approach, which is a known principle to reduce capacitive couplings, is applied in electrical machines every now and then. In this article, the principle of slot-embedded grounded electrodes is extended to cover also the end-windings. Thus, the electrodes provide a better shaft-to-ground voltage mitigating effect compared to the case where electrodes are applied only in the lamination stack area. The feasibility and effectiveness of such a countermeasure are investigated. Different options in terms of scaling of both the machine size and diameter of the electrodes were analyzed and corresponding conclusions were pointed out.