LAUSR

The last decade has witnessed a growing demand for precise positioning in many applications, including autonomous car navigation. The safety features in autonomous driving and Advanced Driver Assistance Systems (ADAS) require lane-level positioning accuracy. Such accuracy can be obtained from the Global Navigation Satellite Systems (GNSS) through either differential techniques or Precise Point Positioning (PPP). PPP is currently favored over differential GNSS because it provides a global solution without the need for local reference stations. Nevertheless, employing PPP for land vehicles would be challenging due to frequent signal degradation and blockage. Integrating PPP with an Inertial Navigation System (INS) can solve the solution continuity problem; however, the INS solution drifts over time, resulting in losing the desired accuracy. Implementing a reliable PPP/INS system that can preserve the required accuracy is not trivial, especially with financial and computational cost constraints. This article proposes the integration of PPP with the Reduced Inertial Sensor System (RISS) for lane-level car navigation. The high-precision needed in lane-level positioning can be achieved by integrating PPP with high-end INS. Since high-end INS are expensive, this work proposes the use of RISS instead of the traditional INS. RISS uses only one gyroscope and two accelerometers, which can save more than half the high-end INS cost. The proposed PPP/RISS system was tested through three road tests that included highway driving under several overpasses. The system was able to maintain horizontal position errors of less than 50 cm.