LAUSR

This paper presents a three-dimensional (3-D) wire bondless power module using silicon carbide (SiC) power devices. Commercially available SiC power devices are designed for wire bonding. Wire bonds have an inherent parasitic inductance that limits high-frequency switching. This results in an underutilization of the full potential of SiC power devices, which have very low switching losses at high frequencies. Wire-bonded power modules run into a performance ceiling when it comes to ultrafast switching. This paper strives to provide a solution to this issue, which involves reconfiguring a commercially available bare die SiC power device into a flip-chip-capable device. A wire bondless SiC Schottky diode package was demonstrated and its performance was contrasted with a conventional wire-bonded package. A 24% reduction in the ON-state resistance was observed in the wire bondless package. As a next step, wire bondless SiC MOSFET packages were developed and tested in a half-bridge configuration in a highly integrated 3-D arrangement. This approach departs from the conventional concept of a power module—demonstrating a direct-bonded-copper-less and baseplate-less half-bridge switching cell. Double-pulse tests conducted on the cell showed >3× reduction in the parasitic inductance of the 3-D cell as compared with a conventional wire-bonded module.