LAUSR

In more electric aircraft (MEA), three-phase power factor correction (PFC) rectifiers of several kilowatts are required. In this paper, a three-phase buck–boost derived PFC converter with three switches and with input inductors connected in delta configuration for use in MEA is presented. The proposed converter is operated in a discontinuous conduction mode to achieve PFC at ac input. This avoids the inner current control loop which further eliminates the current sensors. It requires only one output voltage sensor unlike five sensors in conventional PFC converter for its control implementation. This makes the system cost effective, more reliable, and robust. A simple voltage control loop is used to generate the gate signals. The steady state operation of the converter and detailed design calculations are presented. For each power component, the analytical expressions for calculating the average and rms current ratings are derived to facilitate the converter design. The small-signal model of the converter is presented to aid the controller design. The experimental results from a 2 kW laboratory prototype are presented to confirm the operation of the proposed converter. An input power factor of 0.999, an input current total harmonic distortion of as low as 2.76%, and a high conversion efficiency of 96% are achieved from the prototype.