Viscosity measurement using a cone-and-plate rheometer is considered to provide an objective and reliable evaluation of thickening agents for dysphagia management. Here we showed its measurement uncertainty in the context… Click to show full abstract
Viscosity measurement using a cone-and-plate rheometer is considered to provide an objective and reliable evaluation of thickening agents for dysphagia management. Here we showed its measurement uncertainty in the context of an inter-laboratory study. Eight test samples (i.e., four viscosity standard liquids, one xanthan gum reagent powder, and three commercial thickening agent powders) were distributed to ten laboratories in a blinded manner. According to the same standard operating procedure, each laboratory dissolved the xanthan gum or thickening agents at four concentrations (0.5-4.0 g/100 g) and then measured their viscosity (35-803 mPa∙s). As for the viscosity of the standard liquids, the grand means were 98-100% of the certified values, and the relative standard deviations for repeatability (RSDr ) and reproducibility (RSDR ) were ca. 1% and ca. 5%, respectively, suggesting good accuracy in the measurement process. On the other hand, as for the viscosity of the thickening agents, RSDr and RSDR were ca. 2-6% and ca. 5-8%, respectively; however, heterogeneity in the preparation process comprising a manual dissolving step may increase these to near 60%. Furthermore, RSDr and RSDR of estimated additive concentrations to achieve targeted viscosities (50-500 mPa∙s) based on concentration-viscosity curves were ca. 1-3% and ca. 3-5%, respectively, with a few exceptions. These findings suggest that a strictly standardized procedure provides reliable data on the viscosity measurements for thickening agents. This article is protected by copyright. All rights reserved.
               
Click one of the above tabs to view related content.