LAUSR

In a companion article, the etch characteristics of materials within the Si-C-O-N-H system were surveyed using two common fluorinated plasma etches used to etch SiO2 interlayer dielectrics and SiN:H etch stop layers (CHF3 and CF4/O2, respectively) with the goal of identifying new materials or “colors” to assist in the simplification of advanced multipass optical lithography. In this study, the authors investigate additional materials outside the traditional Si-C-O-N-H phase diagram with the hope of identifying potential third or fourth color pattern-assist materials. The specific materials investigated include a series of high-k dielectrics commonly used in the industry (Al2O3, AlN, and HfO2) and boron-based solids (a-B:H, a-BxN:H, a-BxP:H, and a-BxC:H) that have been previously identified as potential hard mask, polish stop, and/or low-k dielectric materials. The high-k dielectrics were all found to exhibit low to unmeasureable etch rates in both fluorinated etches. In contrast, the boron-based solids al...