LAUSR.org creates dashboard-style pages of related content for over 1.5 million academic articles. Sign Up to like articles & get recommendations!

Glass-Fiber-based MR-safe Guidewire for MR Imaging-guided Endovascular Interventions: In Vitro and Preclinical in Vivo Feasibility Study.

Photo from wikipedia

Purpose To evaluate glass-fiber-based guidewires that are safe for magnetic resonance (MR) imaging-guided endovascular interventions by using a phantom and an in vivo swine model. Materials and Methods MR imaging-safe… Click to show full abstract

Purpose To evaluate glass-fiber-based guidewires that are safe for magnetic resonance (MR) imaging-guided endovascular interventions by using a phantom and an in vivo swine model. Materials and Methods MR imaging-safe guidewires were made from micropultruded glass and/or aramid fibers and epoxy resin with diameters of 0.89 mm (0.035 inch) for standard and stiff guidewires and 0.36 mm (0.014 inch) for micro guidewires. MR imaging visibility and mechanical properties were assessed in a pulsatile flow model. After approval was obtained from the institutional animal care and use committee, MR imaging guidewires were evaluated for standard endovascular procedures in nine pigs. Real-time steady-state free-precession sequences were used for MR imaging-guided catheterization, balloon dilation, and stent implantation into aorto-iliac/visceral arteries and the vena cava (temporal resolution, five images per second; and spatial resolution, 150-mm field of view, and 128 × 128 matrix) with a 1.5-T clinical imager. Visualization with the guidewires was rated on a four-point scale, handling was rated on a three-point scale, and catheterization times for different vessel regions were determined by two interventional radiologists. Afterward, handling ratings and catheterization times were obtained for standard nitinol guidewires during x-ray-based fluoroscopy. Cannulation times, signal intensity in each vessel region, and visualization and handling ratings were measured for the MR imaging guidewires. Bland-Altman analysis was performed for inter- and intraobserver variability of cannulation time. Spearman rank correlation was used to compare handling of MR imaging guidewires and standard nitinol guidewires. Results MR imaging guidewires were characterized by good to excellent visibility, with a continuous artifact of 2 mm in diameter and 4 × 8-mm ball-shaped tip marker. Stiffness, flexibility, and guidance reflected comparable times for all in vitro and in vivo procedures with both the MR imaging and standard nitinol guidewires. Standard and micro MR imaging guidewires were most suitable for the iliac crossover maneuver. Phantom visceral artery cannulation was easier with standard and micro MR imaging guidewires. The stiff MR imaging guidewire provided the best support for cannulation of the swine aorta and vena cava. All interventional procedures were performed successfully without complications. Conclusion Preliminary results showed that the use of glass-fiber-based guidewires for evaluation of MR imaging-guided endovascular interventions is technically feasible and safe in a swine model, and potentially, in humans. © RSNA, 2017 Online supplemental material is available for this article.

Keywords: fiber based; imaging guidewires; imaging guided; guided endovascular; glass fiber

Journal Title: Radiology
Year Published: 2017

Link to full text (if available)


Share on Social Media:                               Sign Up to like & get
recommendations!

Related content

More Information              News              Social Media              Video              Recommended



                Click one of the above tabs to view related content.