LAUSR

The building finish layer is a comprehensive structural system including the building exterior insulation system and building exterior finish. Combining with buildings has the advantage of reducing wall heat loss and building deformation caused by large temperature differences. Since the building finish layer is prone to cracking, hollowing, and peeling, during the application process, its safety needs to be studied and certified. This study prepares 20 groups of specimens, 15 anchor bolts in each group. The anchor bolt pull-out strength test is carried out. Anchoring damage evolution law and failure mode of anchor bolts are investigated. And the influence of anchoring methods on the pull-out bearing capacity is analyzed. In addition, ABAQUS finite element data simulation is carried out. The stress state of finish in thermomechanical coupling condition and without the effect of temperature are compared and analyzed. The influence factors of anchor bolt pull-out strength and the influence of temperature load on the long-term performance of building finish layer are obtained. The durability of the building finish layer is analyzed. The results show that the anchoring strength of the anchor bolt is positively correlated with the anchoring depth. The anchoring strength is influenced significantly by anchoring construction sequence and temperature. The stress under the coupled effect of temperature and load is greater than that of the single effect of load, and the stress distribution changes significantly. Due to thermal expansion and contraction, the anchor bolt would loosen, which is more prone to damage the building finish layer in a low temperature environment. The weight relationship of each influencing factor of the building finish layer is proposed. A systematic evaluation index system is established. The results of this study provide a basis for subsequent related research work and engineering applications.