LAUSR

OBJECTIVE To investigate postural control related to a lower limb exoskeleton (Chairless Chair) when (a) reaching for a working tool, and (b) an external perturbation occurs. BACKGROUND Lower limb exoskeletons aiming to reduce physical load associated with prolonged standing may impair workers' postural control and increase the risk of falling. METHOD Forty-five males were reaching for an object (3-kg dumbbell) at the lateral end of their reaching area without the exoskeleton in upright standing (STAND) and with the exoskeleton at a high (EXOHIGH.SEAT) and low sitting position (EXOLOW.SEAT). The task was performed with the object placed in three different angles (120°, 150°, and 180°) in the transversal plane. The minimum absolute static postural stability (SSABS.MIN) as the shortest distance (mm) of the center of pressure to the base of support border was measured (zero indicates risk of falling). Additionally, eight subjects were standing without the exoskeleton or sitting on it (EXOHIGH.SEAT and EXOLOW.SEAT) while being pulled backward. The tilting moment when subjects lost their balance was assessed. RESULTS SSABS.MIN was lower when using the exoskeleton (p < .05) but still about 17 mm. The location of the object to be reached had no influence. Tilting moments of less than 30 nm were sufficient to let people fall backward when sitting on the exoskeleton (50 nm for STAND). CONCLUSION Impairments in postural control by the exoskeleton may not be relevant when reaching laterally for objects up to 3 kg. When an external perturbation occurs, the risk of falling may be much higher; irrespective of factors like uneven or slippery flooring. APPLICATION The risk of falling using the exoskeleton seems to be low when reaching laterally for an object of up to 3 kg. In situations where, for example, a collision with coworkers is likely, this exoskeleton is not recommended.