LAUSR

There is an increasing demand for the use of “green”-based materials as reinforcement and matrix materials in composites. However, the ability of these natural-based materials to perform as consistently and reliably as conventional materials is still relatively unknown. A key importance in the viability of these materials is the evaluation of the content of voids and imperfections, which may affect the properties of the entire composite. In this study, the microstructure of tubular-braided composites manufactured from cellulose fibers and a partially bio-derived resin was studied with the use of micro-computed tomography. These methods were used to determine the effect of modifying braid angle, resin type, and curing method on fiber volume fraction, void volume, and void distribution. It was determined that the void content increased with the increase in braid angle, and vacuum-bagging reduced the total void content. The sample with the smallest braid angle produced with vacuum-bagged curing contained a void fraction of 1.5%. The results of this study proved that the materials used could be viable for further testing and development and that micro-computed tomography imaging is valuable for identifying how to improve consistency and minimize imperfections to create more accurate and reliable natural fiber-braided composites.