LAUSR

The analysis of several micromechanical models for estimating strength of composite laminae is presented. Longitudinal tensile, compressive and in-plane onset shear strengths are analytically estimated and compared with experimental data available in the literature. The tensile longitudinal load predominantly induces rupture of fibers. On the other hand, the compressive strength is highly influenced by fiber misalignment, inducing a wide range of failure mechanisms. The material response to in-plane shear presents a strong nonlinear response. The estimation of longitudinal tensile strength based on the rule of mixture approaches is compared with 27 experimental data. A novel improvement is proposed assuming that in situ strength of fiber is smaller than fiber strength measured individually due to manufacturing induced damage. For the in-plane shear, 6 models are compared with 10 experimental stress-strain curves, including a novel closed-form expression based on the concentric cylinders model. Finally, for the longitudinal compressive strength, 8 micromechanical models, including a novel model to estimate misalignment effect in fiber crushing, are compared with 61 experimental data are analyzed. Results indicate that the minimal average error for the longitudinal tensile strength is 12.4% while for the compressive strength it is 15%. For the shear strength, the closest prediction depends on the strength definition and the proposed damage onset strength presents the best predictions. In general, the newly proposed models present the best estimations compared with the other models.