LAUSR

Use of high-performance fibers such as poly(p-phenylene-2,6-benzobisoxazole) (PBO) improves the mechanical properties of dental fiber-reinforced composites (FRCs). However, the surfaces of high-performance fibers are relatively inert, and the interface with the resin matrix is poor. This has become a limitation restricting the performance of PBO FRCs in dentistry. Nanomaterials were introduced onto PBO fibers to construct various hierarchical reinforcements to obtain a dental FRC with higher flexural performance and optimized interface bonding. Four hierarchical reinforcements were constructed: PBO-ZnO nanoparticles (NPs), PBO-ZnO nanowires (NWs), PBO-ZnO NPs-cage silsesquioxane (POSS), and PBO-ZnO NWs-POSS. Performance following this optimized method was evaluated at macroscale and microscale levels, including measurement of the interfacial properties and mechanical properties of FRCs. The physicochemical characteristics of PBO fibers before and after modification were measured to determine the interfacial bonding mechanisms and to verify the connection between the microinterface and macromechanical properties. The cytotoxicity of the preferred PBO FRC was evaluated using the CCK8 assay. In comparison to other designs, the interfacial shear strength (IFSS) of PBO-ZnO NWs-POSS was the highest (29.31 ± 2.40 MPa). The corresponding FRC had the highest flexural strength under a static load (925.0 ± 39.2 MPa), the flexural modulus (39.39 ± 1.41 GPa) was equivalent to that of human dentin, and in vitro cytotoxicity was acceptable. The interfacial bonding mechanisms of PBO-ZnO NWs-POSS resulted from mechanical interlocking, chemical bonds, hydrogen bonds, and van der Waals forces. In summary, the PBO-ZnO NWs-POSS hierarchical reinforcement was introduced in dental FRCs and showed remarkable enhancement of the IFSS and flexural properties. We verified that the PBO-ZnO NWs-POSS hierarchical reinforcement was successful. This PBO FRC may be applied in dentistry as a new option for endodontic posts. Our study provides an interface design strategy for developing high-performance FRCs reinforced with high-performance fibers for dental applications.