LAUSR

Additive manufacturing is becoming more and more significant for the production of engineering products. The global community of designers and manufacturers will undoubtedly benefit from identifying the process factors that could lead to superior mechanical behaviour. The incorporation of fibres and nanoparticles in polymer matrix is one of the most significant advancements in polymer fabrication. This study intends to investigate how the flexural behaviour of dissimilar polymer composites viz carbon fibre reinforced poly lactic acid (CF-PLA), carbon fibre reinforced poly ethylene terephthalate glycol (CF-PETG) and multi walled carbon nano tubes reinforced PLA (MWCNTs-PLA) are affected by process parameters viz nozzle diameter (0.2 mm, 0.4 mm, 0.6 mm), and infill pattern (triangular, honeycomb, rectilinear) through fused filament fabrication (FFF). Flexural testing was carried out on the fabricated specimens, and post to the testing, fractography has been carried out and statistical analysis of the observations is performed utilizing analysis of variance and Taguchi method. According to the observations, flexural strength of the polymer composite specimen increases with increase in nozzle diameter (ND). The flexural behaviour is also directly impacted with the variation of infill pattern (IP). Process parameter variations affect target factors differently depending on the fabricating material. For flexural behaviour, IP contributes 68.27% to CF-PLA, while ND contributes 88.96% to CF-PETG and 77.59% to MWCNTs-PLA. Overall, the highest flexural strength, 70.372 MPa, is exhibited by the specimen with ND 0.6 mm and rectilinear IP for MWCNTs-PLA as fabricating filament material. This study will aid researchers and designers in developing FFF-fabricated electrochemical energy storage devices with improved flexural behaviour of functional parts for a wide range of applications.