LAUSR

The results of an experimental investigation of six large scale rectangular reinforced concrete (RC) beams subject to different ratios of combined bending, shear, and torsion strengthened with externally-bonded carbon fiber reinforced polymer (CFRP) U-wraps are presented. All beams exhibited torsion-dominated behaviour. The presence of discrete CFRP U-wrap strips controlled the cracks well and the resulting torsional cracks were observed to be oriented at about 50°. Regardless of loading ratio, strengthened beams exhibited a 70% increase in torsional capacity. Before cracking, torsion to flexure ratio had a small effect on the flexural and torsional stiffness indicating that twist and deflection have a small counteracting effect on each other. Existing beam capacities were assessed using ACI 318-19 and GB 50010-2010 while CFRP strengthening was assessed based on fib Bulletin 14. Main findings are as follows: the ACI 318-19-predicted torsional capacity was conservative while GB 50010-2010 appeared to result in better capacity-prediction of unstrengthened RC beams. Even though load capacities derived from GB 50010-2010 are consistent with torsion-dominated behaviour, neither standard-based approach addresses the complete interaction of internal forces which is necessary to determine existing in situ strength for FRP strengthening applications. The fib Bulletin 14 approach to FRP strengthening for torsion was extrapolated to U-wraps and shown to overestimate the strengthening effect of the CFRP system applied. Critically, the assumed angle of inclination of torsional cracking was increased by the presence of the U-wraps, reducing the efficacy of the CFRP application.