LAUSR

Combining shape memory alloy (SMA) and carbon fiber-reinforced polymer (CFRP) sheet can achieve a self-stressing SMA-CFRP composite, providing an innovative prestressing method for steel elements. This study applied SMA(Ni–Ti–Nb) wires and CFRP sheets to achieve composite strengthening for notched steel beams. The effectiveness of SMA-CFRP composite for flexural strengthening of notched steel beams was evaluated, and the formula for the maximum allowable moment of the strengthened beams with SMA-CFRP composites was proposed. The four-point bending test results showed that the ultimate load and flexural stiffness of the strengthened beams with SMA-CFRP composites increased by 79.2% and 57.9% more than those of the unstrengthened beams. By comparison, the CFRP-only and SMA-only strengthened beams merely achieved half the ultimate load and flexural stiffness over the strengthened beams with SMA-CFRP composite. Besides, compared to the unstrengthened beams, the notch tip yield load for the strengthened beam with SMA-CFRP composite was increased by 230%, while the notch tip yield load for strengthened beams with CFRP-only and SMA-only just increased by 70% and 125%. These indicate that the SMA-CFRP composite strengthening can significantly delay crack propagation and improve the load capacity and stiffness of notched steel beams. Moreover, the analytical results of the maximum allowable moment were in good agreement with experimental results, indicating the accuracy of the proposed analytical equations.