To assess the behavior of sand–silt mixtures, strain-controlled monotonic triaxial tests were conducted on sand–silt mixtures of specimen size 71 mm in diameter and 142 mm in height at various relative densities… Click to show full abstract
To assess the behavior of sand–silt mixtures, strain-controlled monotonic triaxial tests were conducted on sand–silt mixtures of specimen size 71 mm in diameter and 142 mm in height at various relative densities but same isotropic effective confining pressure of 100 kPa. Concept of limiting fines content (LFC) was verified by these undrained monotonic triaxial tests. LFC was found to be the very important parameter to understand the behavior of sand–silt mixtures. The behavior of sand–silt mixture changes approximately at LFC. At constant relative density, increase in silt content decreases the undrained peak shear strength till LFC. After LFC the strength becomes near about same till pure silt sample. The reason of behavior could not be explained. At constant global void ratio, the peak shear strength decreases with increase in silt content till LFC and for further increment of silt content the peak shear strength increases. Sand–silt mixtures containing certain amount of silt which is near to the LFC showed flow type as well as brittle behavior. Failure of structure on this type of soil will be catastrophic during earthquake. In the case of permeability decreased with increasing silt content up to LFC. After the LFC, dry density is decreasing with increasing silt content but permeability remains constant till pure silt.
               
Click one of the above tabs to view related content.