The phase modulation and demodulation technique is widely used in resonant optical gyroscopes to accurately detect resonance frequencies, which directly affect gyro sensitivity. In order to overcome the influences of… Click to show full abstract
The phase modulation and demodulation technique is widely used in resonant optical gyroscopes to accurately detect resonance frequencies, which directly affect gyro sensitivity. In order to overcome the influences of the system phase fluctuations, an in-phase and quadrature (IQ) demodulation technique is introduced for a resonant micro-optic gyroscope (RMOG). The phase fluctuations in the RMOG are measured, and their influence on the demodulation slope at the resonance point is compared between the traditional sinusoidal demodulation and the IQ demodulation both theoretically and experimentally. It can be concluded that the output of the proposed IQ demodulation is not affected by any phase fluctuations. The demodulation slope is always at its maximum value, thus improving the signal-to-noise ratio of the detection system. By using the IQ demodulation technique, a random walk coefficient of 0.5°/√h is carried out. A long-term bias stability of 9°/h is successfully observed, which is improved by a factor of 1.6 compared with that obtained using the traditional phase-sensitive sinusoidal demodulation technique.
               
Click one of the above tabs to view related content.