LAUSR

The transmission of electromagnetic (EM) waves through a dielectric plate will be decreased significantly when the incident angle becomes extremely large, regardless of transverse electric (TE)- or transverse magnetic (TM)- polarization. In this regard, we propose a facile way of tailoring the permittivity of the dielectric material using metasurface to enhance the transmissions of both TE- and TM-polarized waves under extremely large incidence angles. Due to parallel or antiparallel electric fields induced by the metasurface, the net electric susceptibility is altered, and hence the effective permittivity can be tailored to improve the impedance matching on the two air-dielectric interfaces, which enhances the wave transmissions significantly under extreme incident angles. As an example, we apply this method to a typical ceramic-matrix composite (CMC) plate. By incorporating orthogonal meta-gratings into the CMC plate, its effective permittivity is reduced for the TE-polarized waves but increased for the TM-polarized waves under the extreme incidence angle, which can reduce the impedance for the TE-polarization and increase the Brewster angle for the TM-polarization. Therefore, the impedance matchings for both TE- and TM-polarizations are improved simultaneously and dual-polarized transmission enhancements are achieved under the extreme angles. Here, the transmission responses have been numerically and investigated using the finite-difference-time-domain (FDTD) method. A proof-of-principle prototype is designed, fabricated, and measured to verify this method. Both numerical simulations and measurement results show that the prototype can operate under extremely large incidence angles θi∈[75°,85°] with significant transmission enhancement for both TE- and TM-polarizations compared to the pure dielectric plate. This work provides a facile way to enhance the transmissions under extreme angles and can be readily extended to terahertz and optical frequencies.