LAUSR

Beam quality and average output power are two long-sought parameters of continuous-wave lasers. The operating characteristics of a Yb:YAG thin-disk laser based on a 72-pass pump module using output couplers with continuously variable coupling rates are reported. When the pump power is 450 W, the average power of more than 210 W is obtained, and the corresponding optical-optical efficiency is about 46.67%. The output beam is near diffraction limited with M2=1.20 and 1.18 on the horizontal and vertical directions respectively. The thin-disk laser maintains the beam quality near diffraction limited within the whole pump power range by continuously changing the coupling rate of the output coupler (the combination of thin film polarizer and quarter-wave plate) according to the incident pump power. The experimental results show that by continuously changing the coupling rate, combined with the dynamic change of thermal lens effect, the laser beam quality factor M2 can be reduced from 2.0 to 1.2, and the beam quality can be improved by about 40%. The improvement of and increase of average output power confirm that resonators with continuously variable coupling rate are a promising method for enhancing output performance of thin-disk lasers.