For the problem of coal dust pollution in the return air lane of the comprehensive mining working face of soft rock mines.Based on the principle of supersonic siphon pneumatic atomization… Click to show full abstract
For the problem of coal dust pollution in the return air lane of the comprehensive mining working face of soft rock mines.Based on the principle of supersonic siphon pneumatic atomization dust control, mobile vehicle-mounted pneumatic spraying combined with full-section fog curtain dust control technology is proposed to address the coal dust pollution problem in the return air tunnel of the comprehensive mining working face of soft rock mines. This technology has a wider spraying range, stronger wind resistance and lower energy consumption.Using the k-ε turbulence module and the fluid flow particle tracking module of COMSOL simulation software, a three-dimensional numerical model of the return air tunnel was established. The effect of wind flow characteristics on the diffusion range of coal dust and fog droplets was analysed, and the dust transport pattern and dust control effect of the new technology were obtained for different cross-sectional return airways. The results show that the velocity of the wind flow is continuously decayed by the slope, and the dust of different particle sizes is distributed differently by the inertial force. Coal dust with particle sizes larger than 6.5 μm accumulates below the structure at a lower velocity, and coal dust with particle sizes smaller than 4.5 μm is mostly suspended above the structure at a higher velocity. The device effectively stops the transport of dust and covers the whole section of the roadway, and the dust removal efficiency reaches 96.53%~97.93%, which provides relevant theoretical support and treatment means for the control of dust pollution in the return airway of coal mines.
               
Click one of the above tabs to view related content.