LAUSR

Wrist injuries are one of the most common fractures, specifically around 25% of fractures among the pediatric population and up to 18% in the elderly age group are distal radius fractures. To date, the standard treatment entails the use of a tailor-made plaster of Paris cast. Although it is a simple and reliable treatment, it presents several disadvantages: its weight generally causes discomfort, it cannot be taken off without breaking it, it can cause skin rashes and prevents ventilation of the treated area. To overcome the limitations of the above mentioned treatment, 3D printed orthopaedic casts based on reverse engineering (RE) and additive manufacturing (AM) techniques have been proposed in literature. Despite these solutions prove to be a valid alternative to the standard treatment, the clinical use of AM-based devices is not trivial due to the need of expert CAD modelers to design the 3D model of the orthosis starting from the patient’s anatomy 3D acquisition. In this work, the authors identify a systematic procedure to create an orthosis model, compliant with medical guidelines, using common CAD tools. The systematic procedure, even still manually performed, envisages a set of tasks, grouped into five main blocks, that will be easy to be automatized in the future, thus eliminating the necessity of designing expertise to model the orthosis. The proposed procedure allows to design a device composed of two halves, to ease the application, locked through a zip tie-based mechanism. A preliminary ventilation pattern is proposed and tested with a FEM analysis to ensure structural resistance. The procedure has been tested on six case studies: all the orthoses models were correctly generated without major complications and positive user feedbacks were generally obtained throughout the tests.