LAUSR

Abstract This article briefly discusses the role of interphase in the elastic moduli of unidirectional fiber-reinforced polymer composite materials. For this unidirectional glass fiber was chosen as reinforcement, and epoxy was selected as the matrix. A hexagonally packed representative volume element is used for the micromechanical analysis. Experimental validation was initially used to verify the accuracy of the established equations of the rule of mixing, Composite Cylinder Assemblage, Chamis, Halpin and Tsai, and Puck. The Chamis equation was found to be the most reasonable. Then the finite element approach in which interphase has been included was used to estimate the elastic moduli. The finite element model without interphase and the experimental result were taken as a reference. The influence of interface ratio and property of interphase on the homogenised elastic properties of the unidirectional fiber-reinforced polymer composites is analysed. A micromechanics plugin in Abaqus software was used to estimate the density and Young’s modulus of the unidirectional fiber-reinforced polymer composites. The interphase properties are varied, having 6.25%, 12.5%, 25% and 50% influence of the fiber phase and the remaining influence of the matrix phase with interface ratios of 0.1, 0.2 and 0.3. The interface ratio of 0.3, having 6.25% fiber phase influence, gave the most reasonable moduli values (with an error <10%) compared to the mean experimental moduli. The study showed interface ratio and interphase properties to critically influence the overall elastic property of the unidirectional fiber-reinforced polymer composites.