LAUSR

Simple Summary Depending on the location and configuration of renal tumors, it is sometimes difficult to grasp, excise, and properly remove them. We have designed and developed a device to improve robotic laparoscopic partial nephrectomy. We tested the device on porcine kidneys and livers and embalmed human cadavers. A preliminary evaluation of this surgical tool showed satisfactory device setup, suction, and tissue handling characteristics. Abstract In this paper, we describe the development and evaluation of a novel tissue-holding device (THD) for use during robotic-assisted laparoscopic partial nephrectomy. The THD is a vacuum-based apparatus made of either 3D-printed polyethylene or stainless steel. The proximal end connects to suction tubing routed outside the body, while the distal end is conically shaped and designed to firmly interface with the tumor. Device feasibility studies were performed on six porcine kidneys, two porcine livers, and two embalmed human cadavers. A Likert-scale rating was used to assess device setup, suction, and tissue handling. Additional tests were performed using the daVinci Xi® robotic system. Finally, the holding force of the THD was assessed using different standard vacuum systems and pressure settings. In porcine tissue, the device setup, tissue suction, and handling were rated as “good”. THD insertion and removal was uncomplicated. In a simulated transabdominal approach on fixed human cadavers, the device setup, suction, and tissue handling were also rated as “good”. No macroscopic tissue compromise or device deterioration was noted. The handling and holding abilities using the daVinci Xi® robotic system were also rated “good”. The device was able to successfully hold over 300 g of tissue at a suction pressure of −600 mmHg. The preliminary evaluation of the THD demonstrated satisfactory results.