LAUSR

Steel fiber and Nano–SiO2 reinforced concrete is a novel material of concrete which has great potential to be used in practical engineering. However, there is relatively little literature available on the flexural behavior of steel fiber and Nano–SiO2 materials reinforced concrete (SFNMRC) beams. Hence, the main objective of this paper is to investigate the flexural performance of SFNMRC beams through combined experimental and theoretical studies. A total of 10 specimens were tested to investigate the flexural behavior and the effect of some key parameters, including concrete strength, the volume fraction of steel fiber, and the amount of Nano–SiO2. The load vs. deflection curves of SFNMRC beams during the whole loading process were analyzed in detail. The failure mode was discussed in detail, and the specimens all behaved in a very ductile manner. Furthermore, the test results indicated that bending cracks and concrete crushing were formed in the compression zone of all specimens. With the increase in concrete strength and the volume fraction of steel fiber, both the cracking load and ultimate load of beams increased. The amount of Nano–SiO2 had a limited effect on the flexure performance. Finally, the calculation formula for predicting the flexural bearing capacity of SFNMRC beams was derived with consideration of the effect of steel fiber on the cracked sections after beam cracking. The predicted results show satisfactory agreement with both experimental results. The studies may provide a considerable reference for designing this type of structure in engineering practice.