LAUSR

The amount of orientation difference of crystallites, i.e., the texture in a metallic polycrystal governs, plastic anisotropy, electrical and magnetic properties of the material. For simulating the microstructure and texture evolution during forming processes, representative volume elements (RVEs) often generated based on experimental measurements are commonly used. While the grain size and morphology of polycrystals are often determined via light-optical microscopy, their texture is conventionally analyzed through diffraction experiments. Data from these different experiments must be correlated such that a representative set of sampled orientations is assigned to the grains in the RVE. Here, the concept Texture Sampling through Orientation Optimization (TSOO) is introduced, where based on the intensity the required number of orientations is first assigned to the grains of the RVE directly. Then the Bunge–Euler angles of all orientations are optimized in turn with respect to the experimental measurements. As orientations are assigned to grains of variable size during optimization, the compatibility between inhomogeneity in the microstructure and texture is inherently addressed. This method was tested for different microstructures of non-oriented electrical steels and showed good accuracy for homogenous and inhomogeneous grain size distributions.