LAUSR

This paper discusses and reviews the main real gas effects on the thermodynamic performance of closed Brayton cycles. Cycles with carbon dioxide as working fluids are taken as a reference and a comparison of the thermodynamic cycle efficiencies that are made with other possible working fluids (pure fluids and fluid mixtures). We fixed the reduced operating conditions, in optimal conditions, so that all working fluids had the same thermodynamic global performances. Therefore, the choice of the working fluid becomes important for adapting the cycle to the different technological requirements. The positive effects of the real gas properties in supercritical cycles were approximately maximal at reduced minimum cycle temperatures of about 1.01 to 1.05, with maximum to minimum cycle temperatures of about 2.2. The use of mixtures furthers widens the application of the field of closed Brayton cycles, thereby allowing a continuous variation in the critical temperature of the resulting working fluid and, in some cases, also making it possible to take the condensation with a significant further increase in the thermodynamic cycle efficiency. The paper also demonstrates the thermodynamic convenience of resorting to mixtures of carbon dioxide and inert gases. Extensive measurements of vapour–liquid equilibria and analysis of the thermal stability and material compatibility are essential for a practical and full use of the real gas Brayton cycles.