LAUSR

Methyl methacrylate (MMA)-based repair material for concrete has the characteristics of low viscosity, excellent mechanical properties, and good durability. However, its application is limited due to its large shrinkage. Existing studies have shown that adding perchloroethylene can reduce the shrinkage. On this basis, other properties of modified MMA-based repair materials were tested and analyzed in the present study. The results revealed that the addition of perchloroethylene (PCE) can hinder the polymerization reaction of the system. When CaCO3 with a mass fraction of 30% was added, the viscosity of the material was within the range of 450–500 mPa·s, and the shrinkage decreased to approximately 10%. The bending strength of MMA, and MMA modified by PCE, repair materials at 28 days could reach up to 28.38 MPa and 29.15 MPa, respectively. After the addition of HS-770 light stabilizer with a mass fraction of 0.4%, the retention ratios of the bending strength of materials with ratios of P0 and P3 could reach 91.11% and 89.94%, respectively, after 1440 h of ultraviolet radiation. The retention ratio of the bending strength of the material could reach more than 95% after immersion in different ionic solutions for 90 days.