LAUSR

The superplastic tensile test was carried out on SP700 (Ti-4.5Al-3V-2Mo-2Fe) titanium alloy sheet at 760 °C by the method of maximum m value, and the microstructure characteristics were investigated to understand the deformation mechanism. The results indicated that the examined alloy showed an extremely fine grain size of ~1.3 μm and an excellent superplasticity with fracture elongation of up to 3000%. The grain size and the volume fraction of the β phase increased as the strain increased, accompanied by the elements’ diffusion. The β-stabilizing elements (Mo, Fe, and V) were mainly dissolved within the β phase and diffused from α to β phase furthermore during deformation. The increase in strain leads to the accumulation of dislocations, which results in the increase in the proportion of low angle grain boundaries by 15%. As the deformation process, the crystal of α grains rotated, and the texture changed, accompanied by the accumulation of dislocations. The phase boundary (α/β) sliding accommodated by dislocation slip was the predominant mechanism for SP700 alloy during superplastic deformation.