LAUSR

The objectives of this study were to (1) to evaluate the shear bond strength (SBS) of two ceramic brackets when new and when rebonded following various bracket base conditioning methods, and (2) to determine bond failure mode relative to bracket base morphology. 100 Symetri ClearTM (SC) and 100 Radiance Plus® (RP) ceramic brackets were bonded to bovine incisors and divided into five groups: one group served as controls and four had brackets rebonded following conditioning by: no surface treatment, sealant, sandblasting, and flame then steam. SBS, adhesive remnant index, and bracket base morphology were evaluated. SBS showed no statistical difference between new and rebonded with no surface treatment or sealant (SC brackets) and with sealant or flame and steam (RP brackets). When comparing SC to RP, SBS was higher with SC, no surface treatment, and sandblasted groups. All groups had varying amounts of adhesive left on the tooth, with the sandblasted group having the most. SEM analysis showed that sandblasting damaged the retention features of bracket bases. In conclusion, when rebonded, the SBS of SC brackets that had no surface treatment and both SC and RP brackets that had sealant showed no significant differences to new brackets. Sandblasting damaged the retention features of SC and RP bracket bases, resulting in low SBS.