Solar absorbers in a three-layer configuration have been prepared by dip-coating onto aluminium substrates. They are constituted by two spinel layers with one silica layer on the top and values… Click to show full abstract
Solar absorbers in a three-layer configuration have been prepared by dip-coating onto aluminium substrates. They are constituted by two spinel layers with one silica layer on the top and values of solar absorptance above 0.950 and thermal emittance below 0.04 were obtained. The effects of using different sintering conditions of the upper silica layer on the optical behaviour and durability tests have been studied. Results obtained in accelerated ageing methods, such as thermal stability tests and condensation tests, clearly show that the proposed selective absorber exhibits excellent thermal stability and very good humidity resistance. The results show that the protective action is due not only to the silica layer but also to the alumina layer produced during the absorber preparation. The phase composition of the individual layers was independently confirmed using X-ray diffraction and corroborated by X-ray Photoelectron Spectroscopy. Spinel-like phases were obtained in both the first and second layers. The ageing study shows that the three-layer configuration proposed has a very high potential, in terms of both durability and optical behaviour, for solar thermal low-temperature applications.
               
Click one of the above tabs to view related content.