LAUSR

Detonation and fragmentation of ductile cylindrical metal shells is a complicated physical phenomenon of material and structural fracture under a high strain rate and high-speed impact. In this article, the smoothed particle hydrodynamics (SPH) numerical model is adopted to study this problem. The model’s reliability is initially tested by comparing the simulation findings with experimental data, and it shows that different fracture modes of cylindrical shells can be obtained by using the same model with a unified constitutive model and failure parameters. By using this model to analyze the explosive fracture process of the cylindrical shells at various detonation pressures, it shows that when the detonation pressure decreases, the cylindrical metal shell fracture changes from a pure shear to tensile–shear mixed fracture. When the detonation pressure is above 31 GPA, a pure shear fracture appears in the shell during the loading stage of shell expansion, and the crack has an angle of 45° or 135° from the radial direction. When the pressure is reduced to 23 GPA, the fracture mode changes to tension–shear mixing, and the proportion of tensile cracks is about one-sixth of the shell fracture. With the explosion pressure reduced to 13 GPA, the proportion of tensile cracks is increased to about one-half of the shell fracture. Finally, the failure mechanism of the different fracture modes was analyzed under different detonation pressures by studying the stress and strain curves in the shells.