LAUSR

The clinching process is widely used in joining lightweight sheet metal. We proposed a novel rotated clinching process (RCP), which is characterized by a flat bottom die structure and twin rotating punches. The aim of this study was to evaluate the strength of RCP joints. Al1060 sheets with thicknesses of 1.5 mm and 2 mm were used as the experimental materials. Overlap and T-lap RCP joints with three die depths and five bottom thicknesses were fabricated, and shear and peel tests were performed on the joints. The joint strengths were evaluated based on the mechanical load, cross-sectional profile dimensions, and failure mode. The results showed that the mechanical load is a direct, reliable, and quantitative evaluation criterion, while the cross-sectional profile and failure mode are indirect and qualitative. These criteria confirmed that the strength of thick sheet joints is higher than that of thin sheet joints, the shear strength is superior to the peel strength, and the strengths of the joints are high with failure mainly occurring due to tearing or shear failure. Finally, the key parameters for determining the strength of a joint include the bottom thickness/sheet thickness ratio (Rt), and the die depth (h).