LAUSR

The influence of load on the cellulose microfibrils of single cells or thin wood foils is known. It can decrease the cellulose microfibril angles and, in turn, increase the stiffness. However, this modification of a piece of wood, which is made up of multiple cells, is unknown. The aim of this research was to study the effect of tensile creep on the longitudinal stiffness of radiata pine wood. The modulus of elasticity of each specimen was determined before and after being subjected to tensile creep. The samples were loaded at 1170 N and 1530 N for 20 min at 70 °C. The load was determined as a function of a percentage of the force at the proportional limit. The moduli of elasticity before and post-tensile creep showed no effect on the stiffness of wood at the macroscopic level, but neither were there damage to the cell structure. It can be assumed that there are changes at the microscopic level, but they are not enough to be reflected at the macro scale. It is also challenging to achieve the modifications that occur at the level of a single cell or in thin wood foils; however, the implications of this would be favorable for the development of stronger wood-based products.