LAUSR

Zero-mass metamaterials comprise an orifice and a thin film. The resonance between the film and the air mass of the orifice hole is caused by sound waves, which significantly decreases the transmission loss at a specific frequency. The study novelly incorporates acoustic metamaterials in the delay tube of an interference silencer. In this case, it is determined that an interference silencer and a “side-branch silencer with two different branch pipe lengths” can be realized in a single silencer. At certain frequencies, the acoustic mass of the acoustic metamaterial approaches zero, which results in an interference silencer with the full length of the delay tube applied. At other frequencies, the acoustic metamaterial acts as a rigid wall with high transmission loss, thereby reflecting sound waves at the zero-mass metamaterial location. In this case, it is a side-branch silencer with two different tube lengths, corresponding to the tube lengths from the entrance and exit of the delay tube to the zero-mass metamaterial, respectively. The incorporation of zero-mass metamaterial into an interference-type silencer can introduce the silencing effect of a side-branch silencer with two different branch tube lengths without increasing the volume of the interference-type silencer. Theoretical values were obtained using the transfer matrix. Consequently, the theoretical and experimental values were close, enabling us to predict the transmission loss of the proposed silencer.