LAUSR

Purpose: A bipolar plate with fractal-characterized microstructures can realize intelligent energy transmission and obtain a high efficiency of proton-exchange membrane fuel cells. In this paper, fixed abrasive lapping technology is proposed to fabricate a surface microstructure on a bipolar plate with fractal characteristics. Methodology: The kinematics of the fixed abrasive lapping process was developed and employed to numerically investigate the particle trajectories moving on the target surface by considering the different arraying forms of diamonds on the lapping plate. Findings: It was found from an analysis of both the uniformity and the fractal characteristics that the arraying form of diamonds on the lapping plate, with the distribution of latitude and longitude with an angle of 30° and a gap of concentric circles of 40 mm with a minimum radius of 70 mm and maximum radius of 190 mm, can be used to obtain the best uniformity and fractal characteristics in the fixed abrasive lapping of a bipolar plate. Conclusions: The distribution of the latitude and longitude of 40° and 30° considered in this study is expected to realize the best machining performance in the bipolar plate and present good cell performance.