LAUSR

In order to evaluate and improve the deformation behavior of cement–emulsified asphalt binder (CA) in cement–emulsified asphalt mixture, this study investigated the reinforcement of small additions of fibers (2%, 4%, and 6% addition by mass of cement) on the deformation resistance of CA. A repeated creep recovery test was implemented that measures the recovery rate of creep deformation and accumulated strain. Further, an improved piecewise curve-fitting method was used to determine the parameters of Burgers model, then the creep compliances were fitted and calculated. The results show the repeated creep recovery test to be a suitable method for obtaining useful information about creep and recovery deformation of fiber-reinforced CA. The influence of fiber types and dosages on the deformation recovery ability is determined based on the creep recovery ratio and accumulated strain. The improved piecewise curve-fitting method has high accuracy. Thereafter, the reinforcement effect was analyzed through the evolution of creep compliance under loading. Therefore, this paper can provide a reference for enhancing the properties of cement–emulsified asphalt mixture by maximizing the fiber reinforcement.