LAUSR

Carbon fiber reinforced thermosetting composites (CFRTS) and TC4 alloy are important structural materials for lightweight manufacturing. The hybrid structure of these two materials has been widely used in the aerospace field. However, the CFRTS-TC4 alloy joint formed by the traditional connection method has many challenges, such as poor environmental adaptability and stress concentration. Laser micro-texturing of metal surface-assisted laser connection of CFRTS and TC4 alloy has great potential in improving joint strength. In order to study the effect of laser micro-texturing on the laser bonding of CFRTS and TC4 alloy, the simulation and experimental research of laser welding of TC4 alloy and CFRTS based on laser micro-textures with different scanning spacings were carried out, and the interface hybrid pretreatment method of laser cleaning and laser plastic-covered treatment was introduced to assist the high-quality laser bonding of heterogeneous joints. The results showed that the established finite element model of CFRTS-TC4 alloy laser welding can predict the temperature field distribution of the joint during the welding process and reflect the forming mechanism of the joint. The laser micro-textures with different scanning spacings will lead to a difference in the temperature field distribution on the polyamide (PA6) interface, which leads to a change in heat input on the CFRTS surface. When the laser scanning spacing is 0.3 mm, the joint strength can reach 14.3 MPa. The failure mechanism of the joint mainly includes the cohesive failure of the internal tear of the carbon fiber and the interfacial failure of the interface between the PA6 resin and the TC4 alloy.