LAUSR

Using waste clay brick powder (RBP) to partially replace cement in the preparation of concrete, is one way to recycle construction waste. In order to investigate the physical and mechanical properties and volume stability of recycled micropowder ultra-high-performance concrete (UHPC), the basic mechanical and shrinkage properties of recycled micropowder UHPC were studied at replacement rates of 10%, 20%, 30%, 40% and 50%. The results show that: (1) When the activated recycled brick powder is used to replace the cement, the compressive strength, flexural strength and splitting tensile strength of the UHPC initially increase and then decrease with the increase in the substitution rate. When the substitution rate is 10%, the 28 d compressive strength, flexural strength and splitting tensile strength of the UHPC are the highest; (2) Replacing cement with recycled brick powder can reduce the autogenous shrinkage of the UHPC, and the autogenous shrinkage rate of the UHPC decreases with the increase in the brick powder replacement rate. The drying shrinkage of the UHPC can be reduced by replacing cement with recycled brick powder. The drying shrinkage of the UHPC initially decreases, and then increases, with the increase in the replacement rate of brick powder. When the replacement rate of the brick powder was 30%, the drying shrinkage of the UHPC was the least, and this was 49.7% lower than that in the benchmark group. The prediction models of autogenous shrinkage and drying shrinkage are in good agreement with the experimental results, which can be used to predict the shrinkage development of recycled brick powder UHPC.