Polymer flocculants are used to promote solid–liquid separation processes in wastewater treatment technologies, and bio-based flocculants possess many advantages over conventional synthetic polymers. Potato starch microgranules were chemically modified and… Click to show full abstract
Polymer flocculants are used to promote solid–liquid separation processes in wastewater treatment technologies, and bio-based flocculants possess many advantages over conventional synthetic polymers. Potato starch microgranules were chemically modified and mechanically sheared to produce modified starch flocculants. The effectiveness of produced cationic starch (CS) and cross-linked cationic starch (CCS) flocculants in the thickening and dewatering of surplus activated sewage sludge was evaluated and compared with that of synthetic cationic flocculants (SCFs) The flocculation efficiency of SCF, CS, and CCS in sludge thickening was determined by measuring the filtration rate of treated surplus activated sludge. Comparing the optimal dose of SCFs and CCS flocculants needed for thickening, the CCS dose was more than 10 times higher, but a wide flocculation window was determined. The impact of used flocculants on the dewatering performance of surplus activated sludge at optimal dose conditions was investigated by measuring capillary suction time. The filtration efficiencies (dewaterability) of surplus activated sludge using SCF, CS, and CCS were 69, 67, and 72%, respectively. The study results imply that mechanically processed cross-linked cationic starch has a great potential to be used as an alternative green flocculant in surplus activated sludge thickening and dewatering operations in municipal sewage sludge treatment processes.
               
Click one of the above tabs to view related content.