LAUSR

It is essential to develop a leaching procedure that uses minimal acid consumption, is economical, recovers large amounts of metal, and has a minimal negative impact on the environment. In this paper, a viable hydrometallurgical method using acetic acid as a leachant is suggested for recovering critical metals from waste LCO-type batteries. Several leaching parameters were examined in order to optimize the leaching conditions. With 1.2 mol/L acetic acid, 7% H2O2, 90 °C, an S/L ratio of 10 g/L, and a 60 min leaching period, the maximum leaching efficiencies of Li (99.6%) and Co (95.6%) were attained. By investigating the different kinetic models, it was feasible to figure out the reaction’s pace, as well as the mechanism involved in the leaching process. It was found, through the comprehensive kinetic studies of the leaching process, that the surface chemical reaction controls the leaching mechanism for waste LCO-type batteries. The economic viability of the current leaching procedure in comparison to those of earlier approaches is also discussed.