LAUSR

Absorption spectroscopy has been widely used in gemstone societies as it enables the identification of the origin and post-treatment of gemstones in a non-destructive way. The infrared (IR) range is critical for studies of gemstones such as corundum, emerald, and diamond. Regarding the corundum sample, absorption peaks related to the -OH bond could be used as an index for heat-treatment detection, and different types of inclusions could be identified by analyzing the IR absorption spectrum. The most widely used method for measuring IR absorptions is Fourier-transform infrared spectroscopy (FTIR), which was designed based on the working of the Michelson interferometer. However, FTIR has a few limitations, such as a long measurement time and difficulty in sample placement, which limits its full automation capability. In this study, a mid-infrared (MIR) spectrometer relying on the upconversion phenomenon of non-linear crystals was used to measure the absorption spectra. Corundum with heat treatment features and/or with different common types of inclusions were measured by both transmission and reflection modes. After comparison with the FTIR spectra captured on the same sample set, the same target peaks could be captured with a shorter measurement time and easier operation. The developed MIR spectrometer could directly measure the absorption spectrum in the 2–4.5 µm (2200–5000 cm−1) range within a few seconds. Meanwhile, as both transmission and reflection modes were available, both loose and mounted gemstones could be measured, supporting the widespread use of this device in large-scale production and its ability to achieve full automation.