LAUSR

The buckling response of functionally graded (FG) porous spherical caps reinforced by graphene platelets (GPLs) is assessed here, including both symmetric and uniform porosity patterns in the metal matrix, together with five different GPL distributions. The Halpin–Tsai model is here applied, together with an extended rule of mixture to determine the elastic properties and mass density of the selected shells, respectively. The equilibrium equations of the pre-buckling state are here determined according to a linear three-dimensional (3D) elasticity basics and principle of virtual work, whose solution is determined from classical finite elements. The buckling load is, thus, obtained based on the nonlinear Green strain field and generalized geometric stiffness concept. A large parametric investigation studies the sensitivity of the natural frequencies of FG porous spherical caps reinforced by GPLs to different parameters, namely, the porosity coefficients and distributions, together with different polar angles and stiffness coefficients of the elastic foundation, but also different GPL patterns and weight fractions of graphene nanofillers. Results denote that the maximum and minimum buckling loads are reached for GPL-X and GPL-O distributions, respectively. Additionally, the difference between the maximum and minimum critical buckling loads for different porosity distributions is approximately equal to 90%, which belong to symmetric distributions. It is also found that a high weight fraction of GPLs and a high porosity coefficient yield the highest and lowest effects of the structure on the buckling loads of the structure for an amount of 100% and 12.5%, respectively.