LAUSR

The coupling of an infrared (IR) camera to a freeze dryer for monitoring of the temperature of a pharmaceutical formulation (sucrose/mannitol solution, 4:1%, m/m) during freeze-drying has been exploited further. The new development allows monitoring of temperatures simultaneously at the surface as well as vertically, (e.g., in depth) along the side using custom-made cuvettes. The IR camera was placed on the chamber roof of a process-scale freeze dryer. Monitoring of cuvettes containing the formulation took place from above where one side of each cuvette was equipped with a germanium window. The Ge-window was placed next to an IR mirror having a 45° angle. The long-wave infrared radiation (LWIR) coming from the inside of the cuvette was reflected upwards toward the IR camera. Accurate recording of the temperature along the cuvettes’ depth profile was therefore possible. Direct imaging from −40 °C to 30 °C took place every 60 s on the surface and on the side with a 2 × 2 mm resolution per IR pixel for 45 h resulting in 2700 thermograms. Results are presented for freeze-drying of a pharmaceutical formulation as a function of time and spatially for the entire side (depth) of the cuvette. As the sublimation process was progressing, the spatial resolution (84 IR pixels for the side-view and 64 pixels for the surface-view) was more than sufficient to reveal lower temperatures deeper down in the material. The results show that the pharmaceutical formulation (a true solution at the onset) dries irregularly and that the sublimation front does not progress evenly through the material. During secondary drying, potential evaporative cooling of upper layers could be detected thanks to the high thermal and spatial resolution.